4.1.6 Presubmission Testing - No item, part, or complete
equipment shall be submitted to the Government Inspector by
the Contractor until it has been previously tested and
inspected by the Contractor and found to comply to the best of
his knowledge and belief with all-applicable requirements.
With the consent of the Contractor and at the discretion of
the Procuring Agency, this prior test and inspection may be
participated in or witnessed by the Government Inspector with
the object of eliminating the necessity of repeating such test
and inspection after the equipment has been formally submitted
to the Government Inspector.
4.1.7 Rejection and Retests - The equipment which has
been rejected may be reworked or have parts replaced to correct
the defects and resubmitted for acceptance. Before resubmitt-
ing, full particulars concerning previous rejection and the
action taken to correct the defects found in the original
shall be furnished the Inspector. Units rejected after retest
shall not be resubmitted without the specific approval of the
4.2.1 Examination of Product - Each assembly, subassembly,
and part shall be examined as the Inspector may deem necessary
to determine conformance with this specification and the
applicable drawings with respect to material, dimensions,
instructions, and workmanship.
- Test shall be classified as
one (1) of the first twenty (20) production
units and on one (1) of each subsequent group of one hundred
(100) production units or parts thereof, for each manufacturer
supplying equipment in accordance with this specification.
188.8.131.52 Type test samples shall be selected at random
from production unit that have passed all inspection tests
and shall have inspection tests repeated under environmental
Conditions as specified in 3.8 of this specification.