MS Part Number
Manufacturers Part No.
Upon completion of the preproduction inspection, all the
applicable inspection reports and when applicable, recommendations and
comments pertinent for use in monitoring production shall be forwarded to
the Government quality control representative. One approved adapter shall
be returned to the manufacturer for use in monitoring production. The
other adapters shall be consumed or destroyed in the preproduction inspec-
tion and shall not be considered as part of the quantity to be delivered
Applicable to the Air Force and Army - For purchases by
the Air Force and Army, the quantity and kind of samples, the name and
address of the preproduction inspection activity} and other pertinent
information (see 4.3.1,1 and 18.104.22.168.1 for information) shall be as speci-
fied by the contracting officer (see 6.2).
Quality conformance inspection - The quality conformance
inspection shall consist of the following:
Visual examination of the adapters
Preparation for delivery
Inspection lot -
Adapters - An inspection lot size shall be expressed in
units of one adapter made under essentially the same conditions and from
the same materials and components, The sample unit shall be one adapter,
Preparation for delivery - An inspection lot size shall
be expressed in units of one fully prepared shipping container, containing
adapters fully prepared for delivery made from essentially the same mate-
rials and components The sample unit shall be one shipping container,
containing adapters fully prepared for delivery with the exception that it
need not be sealed.
Sampling for tests and examinations of the adapters -
The sample size, acceptance criteria, tests and examinations required
for the adapters shall be as specified in Table I.