 |
|||
|
|
|||
| ||||||||||
|
|  MIL-A-48449A(AR)
Inspection provisions.
4.3
4 .3.1 Submission of product.
Unless otherwise specified
by the contracting officer, inspection lot size, lot formation
and presentation of lots shall be in accordance with "Submission
of Product" provisions of MIL-STD-105.
4.3.2
Examination
and
tests.
4.3.2.1 Components and subassemblies.
All components
and
subassemblies shall be inspected in accordance with the
applicable Quality Assurance Provisions of MIL-F-13926.
4.3.2.2 Final acceptance inspection.
Subsequent to first
article approval, examination and tests related to Section 3
herein shall be performed on a single defect (individual
characteristic) basis in accordance with MIL-STD-105 and the
sampling plans specified in Tables I, II, and 111 herein.
Exam-
ination and tests for packaging, packing, and marking shall be
in accordance with Section 5 herein.
The tabulated classifica-
tion of defects in Tables I, II, and III shall constitute the
minimum inspection to be performed by the supplier after first
article approval and prior to Government acceptance or rejection
by item or lot.
TABLE I.
100%
Inspection
Requirement
No.
Characteristic
Test procedure
101.
Orientation
3.6
4.6.1
102.
Vibration "B"
4.6.5.2
3.8.4.2
Effects of Vibration &
4.6.6
3.8.5
103.
Shock
104.
3.9.1
Sealing
4.6.7
Purging
3.9.2
105.
4.6.8
Cleanliness
4.6.9
3.9.3
106.
Reticle
accuracy
107.
(Collimation)
4.6.10
3.9.4.1
Repeatability
108.
4.6.10
3.9.4.2
109.
Parallax
3.9.5.1
4.6.11
Operability
110.
4.6.10
3.9.6
Reticle Illumination
3.9.7.1
111.
4.6.12
Radiological
Contamination
3.9.8
112.
4.6.13
NOTE :
The tests in Table I shall be conducted at a temperature
between +60 and +90F.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals