Samples subjected to sampling inspection shall not
be considered or accepted as part of the contract
Sampling inspection selection (see 4.4.2).
Number of samples and inspection sequence for produc-
tion lots in excess of 300 units (see Table III).
Applicable drawing package (see 3.5.1).
Name and location of government representative re-
sponsible for random selection of inspection samples
Items of data required (see 6.3).
Name and location of government approved test labora-
6.2.2 Contract provision. Contracts shall specify the follow-
ing provision for first article inspection.
188.8.131.52 First article. When a first article is required for in-
spection and approval (see 3.1, 4.3, 6.2 and 6.3), the contract shall
specify the following provision for first article inspection. When a
contractor is in continuous production of adapters from contract to con-
tract, consideration should be given to waive the first article inspec-
tions. If inspection is required, indicate:
If first article inspections are conducted at the
contractor's plant or a government approved labora-
tory, an inspection report shall be forwarded to the
procuring activity for verification.
That the approval of first article samples or the
waiving of the first article inspection shall not
relieve the contractor of his obligation to fulfill
all other requirements of the specification and
6.3 Contract data requirements. When this specification is
used in a procurement which incorporates a DD Form 1423 and invokes the
provisions of 7-104.9(n) of the Armed Services Procurement Regulations,
the data requirements identified below will be developed as specified by
an approved Data Item Description (DD Form 1664) and delivered in accor-
dance with the approved Contract Data Requirements List (DD Form 1423)
incorporated into the contract. When the provisions of ASPR-7-104.9(n)
are not invoked, the data specified below will be delivered by the