overall inspection system or quality program. The absence of any inspection requirements in
the specification shall not relieve the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance comply with all require-
ments of the contract. Sampling inspection, as part of manufacturing operations, is an
acceptable practice to ascertain conformance to requirements, however, this does not
authorize submission of known defective material, either indicated or actual, nor does it
commit the Government to accept defective material.
TABLE I. Continuity requirements - electrical resistance
NOTES: 1. Letters .4 through F are connector pin identification
2. 0 indicates zero resistance
# indicates infinite resistance
3. Lamp resistance - indicator light resistance varies from one light to
another and therefore should be removed and checked prior to testing
of unit. Normal resistances is 150 to 250 ohms.
4.1.2 Contractor assurance of compliance. The contractor's quality program or de-
tailed inspection system shall provide assurance of compliance of all characteristics with the