6.2 Ordering data. Procurement documents should specify the following:
Title, number, and date of this specification.
Type of auger required (see 1.2).
The time frame required for submission of preproduction model,
and number of augers required (see 3.2).
When the Government will conduct any or all of the preproduction
model examination and tests. When the Government will conduct
some but not all of the preproduction examination and tests, the
contracting officer should specify which examination and tests
will be conducted by the Government and which examination and
tests shall be conducted by the contractor (see 3.2).
When initial production inspection is required and number of
augers to be furnished (see 3.3).
When a belling tool is required (see 3,6.4).
When standard commercial bearings are acceptable (see 3.6.8).
When electromagnetic interference other than as specified is
required (see 3.9).
When optional lubrication is required (see 3.10.4).
When standard commercial name plates are acceptable (see 3.13.3).
Nomenclature to be placed in top blank when standard commercial
name plates are used (see 3.13.3).
Color of paint required (see 3.14).
When treatment and painting in accordance with the contractor's
standard commercial practice is required (see 3.14.1).
Whether auger shall be designed for military truck
mounting or commercial truck mounting (see 3.17 and 3.18).
Whether the auger designed for military truck mounting
shall be furnished truck-mounted or unmounted (see 3.20.1).
Type, size, and capacity of truck and accessories to be
furnished with the truck when the commercial truck
mounted auger is being furnished (see 3.20.2).
When engineering calculations are acceptable in lieu of testing
When testing of preproduction pack is required (see 220.127.116.11).
Level of preservation and level of packing required (see 5.2 and
5*3). Level B preservation is intended to provide economical but
limited protection and should be specified only when it is determined
that the auger will be held in covered storage (see 6.9).
When preservation of engine repair parts in accordance with
MIL-R-196 is required (see 18.104.22.168).
When level B preservation of auger components other than as specified
is required (see 5.2.2).
When alternate preservation for level C is required (see 5.2.3,1).
6.3 Preproduction model. Any changes or deviations of production augers from
the approved preproduction model during production will be subject to the
approval of the contracting officer. Approval of the preproduction model will
not relieve the contractor obligation to furnish augers conforming to this