Humidity of 95 percent with temperature ranging from 20°C (see 126.96.36.199)
(68°F) to 71°C (160°F).
Vibration to be encountered during service and transportation (see
e. Shot equal to being dropped from a vehicle when in transport (see
3.7 Identification of product. Equipment assemblies and parts shall be marked
for identification in accordance with MIL-STD-130.
3.8 Workmanship. The test adapter, including all parts and accessories, shall
be fabricated and finished in a workmanlike manner to produce units free from
defects. Particular attention shall be given to neatness and thoroughness of
soldering, wiring, marking of parts and assemblies, plating, painting, machine
screw assemblage, and freedom of parts from burrs and sharp edges.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract
or purchase order, the supplier is responsible for the performance of all
inspection requirements as specified herein. Except as otherwise specified in
the contract or order, the supplier may use his own or any other facilities
suitable for the performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves the right to
perform any of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services conform to
4.2 Classification of tests. The inspection and testing of the adapter shall
be as follows:
a. Preproduction tests (see 4.3).
Acceptance tests (see 4.4).
4.3 Reproduction tests. Preproduction tests shall consist of all tests
described under 4.6.
4.3.1 Reproduction test samples. The preproduction test samples shall
consist of models representative of the production items. They shall be tested
at a laboratory designated by the procuring activity, or, When so stated in
the contract, at the contractor's plant under supervision of the procuring
4.3.2 Reproduction test report. When preproduction testing is performed at the
contractor's plant, the contractor shall, after completion of the preproduction
tests, prepare a preproduction test report in accordance with MIL-STD-831 and
furnish complete copies of the report to the procuring activity.