Click here to make tpub.com your Home Page

Page Title: Materials, processes and Parts.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-A-85116(AS)
3.3.1 Materials, processes and Parts.  Materials, processes and parts to
which particular MIL-STD-454 requirements pertain shall, wherever possible,
comply with those requirements.  Any exception shall be subject to procuring
activity approval.
3.3.1.1 Identification of piston actuator explosives.  The identity and
quantity of all explosive materials used in the actuator shall be furnished
along with the actuators submitted for acceptance.
3.3.2 Electromagnetic radiation.  The actuator shall not conduct, radiate,
nor be susceptible to electromagnetic radiation as specified in AS-2266.
3.3.3 Identification and marking.  Each actuator shall be legibly marked
in accordance with MIL-STD-130.  Marking shall include, but not be limited
to, the following:
(a) This specification number.
(b) Manufacturer's code identification number.
(c) Lot or code number indicating date of manufacture.
3.3.4 Interchangeability.  The actuator shall conform to the interchange-
bility requirements of MIL-I-8500.
3.3.5 Safety.  The actuator(s) shall be fabricated, inspected, and tested
with proper consideration for personnel and equipment safety in accordance
with applicable safety provisions of DoD 4145.26M.
3.3.6 Standards of manufacture.
3.3.6.1 Special working environment.  The contractor shall provide adequate
facilities for the fabrication, assembly, and testing of actuators to be
delivered in accordance with this specification. Unless otherwise specified
in the contract (see 6.2.1), the minimum standards for working environments
shall be in accordance with MIL-STD-1695.
3.3.6.2 Certification.  When specified in the contract, the contractor
shall prepare written certification, Including objective quality evidence as
defined in MIL-STD-109, that the materials, parts, and components used as
part of the actuator meet the applicable requirements (see 6.2.2).
3.4 First article.  Unless otherwise specified in the contract, (see 6.2.1),
the contractor shall furnish 60 actuators for the first article inspection
and approval (see 4.1.2.1 and 6.2.1).  The first article sample shall be man-
ufactured using the same design, processes, materials and procedures proposed
for production.  Any production prior to acceptance of the first article sample
shall be at the risk of the contractor.
7

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business