Quality conformance inspection.
4.4.1 Inspection lot formation. The term "inspection lotw is
defined as a homogeneous collection of units of product from which
a representative sample is drawn or which is inspected 100 percent
to determine conformance with applicable requirements. Units of
product selected for inspection shall represent only the
inspection lot from which drawn and shall not be construed to
represent any prior or subsequent quantities presented for
Homogeneity shall be considered to exist provided the
inspection lot has been produced by one manufacturer, in one
unchanged process? using the same materials and methods, in
accordance with the same drawings, same drawing revisions, same
specifications and same specification revisions, and c o m p l i e s
the provisions for submission of product as specified in
MIL-STD-105. All material submitted for inspection in accordance
with this specification shall comply with the homogeneity criteria
specified herein, regardless of the type of inspection procedure
which is being applied to determine conformance with requirements.
The examinations listed in the
Classification of Defects and Test tables shall be performed-on
inspection lots as defined in 4.4.1 of this specification. Prior
to these examinations, the parts and assemblies comprising the
recoil amplifier shall have been inspected in accordance with the
Critical defects. Unless otherwise specified, inspection
for critical defects shall be 100 percent.
b. Major and minor defects. Examination for major and minor
characteristics shall be performed in accordance with the
classification of quality conformance inspections specified
herein. Inspection Level 11 shall be used and individual AQL's
applied in accordance with MIL-STD-105.