 |
|||
|
Page Title:
End Item Dimensional Examination |
|
||
| ||||||||||
|
|  MIL-B-70776 (AR)
4.4.5 End item dimensional examination. The end item shall be
examined for conformance to the dimensions specified on drawings
12910093, 12910096 and 12910097. Any dimensions not within the
specified tolerance shall be classified as a defect. The lot size
shall be expressed in units of bandoleers. The sample unit shall be
one bandoleer. The inspection level shall be S-3 and the AQL,
expressed in terms of defects per hundred units, shall be 10.0.
4.4.6 Packaqing inspection. An examination shall be made to
determine that preservation, packing, and marking comply with the
section 5 requirements. Defects shall be scored in accordance with
with the list below. The sample unit shall be one shipping
container fully packaged. The lot size shall be the number of
shipping containers offered for inspection at one time. The
inspection level shall be S-2 and the AQL, expressed in terms of
defects per hundred units, shall be 4.0.
Defect
Examine
Omitted; incorrect; illegible; of improper size,
Marking (exterior
location, sequence, or method of application.
and interior)
Any component missing, damaged, or not as
Materials
specified.
Inadequate application of components, such as
Workmanship
incomplete closure of container flap, improper
taping, loose strapping, inadequate stapling.
Bulged or distorted container.
Number of bandoleers per bundle is more or less
Content
than specified 1/.
Number of bundles per container is more or less
than specified.
1/ For this defect, one bundle shall be examined from each shipping
container in the sample.
4.4.7 Palletization examination. An examination shall be made
to determine that the palletization complies with the section 5
requirements. Defects shall be scored in accordance with the list
below. The sample unit shall be one palletized unit loads in the
inspection lot. The inspection level shall be S-1 and the AQL,
expressed in terms of defects per hundred units, shall be 6.5.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals