 |
|||
|
|
|||
| ||||||||||
|
|  MIL-B-8565/15
REQUIREMENTS:
1. The dimensions of the battery shall be as shown on figure 1.
2. The part number of the battery shall be D8565/15-1.
3. The rated capacity of the battery shall be 35 ampere-hours, based on its ability to conform to the life
cycle final discharge (35.0 Ah/1 Hr/24C/20.0 V).
4. The weight of the battery shall not exceed 40.82 kilograms (90.0 pounds).
5. Table I lists the quality assurance tests.
6. Delete all requirements for threaded-post connected batteries.
7. The battery shall conform to MIL-B-8565 for type 1, medium rate, except as modified by the following.
3.5.5 Receptacles. Add the following: "For D8565/15-1, the female receptacle (front view) shall be
dimensionally equal to MS3509, style 1. The receptacle may be integrally molded in the container."
3.6.3.2.3 Battery caution marking (type 1 battery only). Delete and substitute the following: "Marking for
Label 2 shown on figure 1 shall show the following with lettering height not less than 0.25 inch.
MAINTENANCE-FREE BATTERY
DO NOT REMOVE COVER
PROCESS THIS BATTERY IN ACCORDANCE WITH
APPROVED PROCEDURES ONLY
SEE NAVAIR 17-15BAD-1
OR APPLICABLE SERVICE T.O."
3.6.8 Capacity and electrical performance. Delete "18.0 volts" and substitute "20.0 volts". Add the
following: "The battery shall comply with the following requirements during the 14.0-volt constant voltage
discharge:
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals