 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-11272/2E
REQUIREMENTS:
Requirements: Requirements shall be in accordance with MIL-C-11272, and as specified herein.
Design and construction: Capacitors shall be of the design, construction, and physical dimensions specified on
figure 1 and in table I.
Pin 1/
DC
Capacitance
Capacitance
rated
tolerances
voltage
available
pF
volts
CY15C221-
220
500
FGJ
CY15C241-
240
500
FGJ
CY15C271-
270
500
FGJ
CY15C301-
300
500
FGJ
CY15C331-
330
500
FGJ
CY15C361-
360
500
FGJ
CY15C391-
390
500
FGJ
CY15C431-
430
500
FGJ
CY15C471-
470
500
FGJ
CY15C511-
510
500
FGJ
CY15C561-
560
300
FGJ
CY15C621-
620
300
FGJ
CY15C681-
680
300
FGJ
CY15C751-
750
300
FGJ
CY15C821-
820
300
FGJ
CY15C911-
910
300
FGJ
CY15C102-
1,000
300
FGJ
CY15C112-
1,100
300
FGJ
CY15C122-
1,200
300
FGJ
1/ Complete type designation will include an additional letter
symbol to indicate capacitance tolerance, where applicable.
Capacitance: See table I.
Capacitance tolerance: F: 1%, G: 2%, J: 5%.
DC rated voltage: 300 and 500 volts.
Temperature range: -55C to +125C.
Life: 150 percent dc rated voltage at 125C +4C, -0C for 2,000 hours.
Group A test - 250 hours: group B continuation test for 1,750 hours.
Qualification inspection. Capacitors shall meet the following requirements, as applicable.
For qualification test:
At 25C:
Insulation resistance: 100,000 megohms minimum.
Capacitance: Change not more than 0.5 percent of nominal value or 0.5 pF whichever is greater, from
initial 125C value.
Dissipation factor: Not to exceed 0.0025.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals