 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-24196A(SH)
5.2.2 Commercial. Commercial packaging (cleaning, preservation, cushioning
and unit pack) of the cleaning system, disassembled or removed components or parts
when applicable, shall be in accordance with the requirements of ASTM D 3951.
Packing shall be level A, B, C, or commercial as specified
5.3 Packing.
(see 6.2.1).
5.3.1 Levels A, B, and C containers. Cleaning systems preserved as
specified (see 5.2) shall be packed in shipping containers, for the level of
packing specified (see 6 .2.1), in accordance with MIL-STD-2073-1, appendix C,
and herein. Unless otherwise specified (see 6.2.1), container selection shall
be at the contractor's option.
5.3.1.1 Caseliners, closure, and gross weight.
5.3.1.1.1 Caseliners. Level A shipping containers shall be provided with
waterproof caseliners in accordance with MIL-STD-2073-1.
5.3. 1.1.2 Closure. Container closure, reinforcing, or banding shall be in
accordance with the applicable container specification or appendix thereto,
except that weather-resistant fiberboard boxes shall be closed in accordance
with method V and reinforced with nonmetallic or tape banding, and domestic or
fire retardant fiberboard boxes shall be closed in accordance with method I
using pressure sensitive tape.
5.3.1.1.3 Weight.
Wood, plywood, and cleated type containers exceeding
with MIL-STD-2073-1 and the applicable container specification or appendix
thereto.
5.3.2 Commercial. Cleaning systems preserved as specified (see 5.2), shall
be packed for shipment in accordance with ASTM D 3951 and herein.
5.3.2.1 Container modification. Shipping containers exceeding 200 pounds
gross weight shall be provided with a minimum of two, 3- by 4-inch nominal wood
skids laid flat, or a skid- or sill-type base which will support the material
and facilitate handling by mechanical handling equipment during shipment and
storage.
5.4 Marking.
5.4.1 Levels A, B, C, and commercial. In addition to any special marking
required (see 6.2.1), interior (unit) packs and shipping containers shall be
marked including bar coding in accordance with MIL-STD-2073-1, appendix F.
NOTES
6.
6.1 Intended use. The ultrasonic cleaning systems covered by this speci-
fication are intended for use on Naval ships, in Naval shipyards and other
military facilities. The systems shall be used for cleaning hydraulic filters,
air filters, electronic and electromechanical assemblies, strainers, valves and
other objects within their capacity.
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals