8 April 1988
12 May 1981
CONTROL, PRESSURE, FILLING, NONVENTED DRUM
This specification is approved for use within the USA Relvoir Research,
Development, and Engineering Center, Department of the Army, and is
available for use by all Departments and Agencies of the Department of
1.1 Scope. This specification covers a pressure shutoff control (valve) with
hose assembly used for filling military standard collapsible drums of 500-gallon
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents shall be those listed
in the issue of the Department of Defense index of Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation.
- Boxes, Wood, Cleated-Plywood.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to: USA
Belvoir Research, Development, and Engineering Center, ATTN: STRBE-TSE, Fort
Belvoir, VA 22060-5606 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.