 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-45300B
4.5.2 Examination.
4.5.2.1 Acceptable quality level. Each sample selected in accordance
with 4.5.1.2 shall be examined to determine conformance to the following
acceptable quality levels (AQL):
Classification
AQL
1.0
Major
Minor
2.5
4.5.2.2 Classification of defects. For examination purposes, defects
shall be classified as listed in table III.
TABLE III.
Classification of defects.
4.5.3 Tests. Sample caps selected as specified in 4.5.1.3 shall be
subjected to the quality conformance tests specified in table I, using an AQL
of 6.5 on the basis of percent defective. The applicability of cap types to
tests shall be as specified in table 11.
4.6 Methods of inspection.
4.6.1 Materials and construction (all types). Conformance to 3.2 and
3.3, shall be determined by inspection of contractor records providing proof
or certification that design, construction, processing, and materials conform
to requirements. Applicable records shall include drawings, specifications,
design data, receiving inspection records, processing and quality control
standards, vendor catalogs and certifications, industry standards, test
reports, and rating data.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals