 |
|||
|
|
|||
| ||||||||||
|
| MIL-C-46239C
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful but is not
mandatory.)
6.1 Intended use. The assembly is used in cartridge actuated devices for Aircrew Emergency Escape
Systems.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and revision letter of this specification
b.
Issue of DODISS to be cited in the solicitation and, if required, the specific issue of individual
documents referenced and that MIL-STD-810D shall be used (see 2.1, 3.5.3, and 4.7.7)
c.
Whether a first article sample is required (see 3.1, 4.4, and 6.3)
d.
Test facility for first article tests (see 4.4.1)
e.
Production test activity and lot size (see 4.1 and 4.5.1.2)
f.
Any special test conditions (see 4.3)
g.
Directions for shipping radiographs of primers and of entire lot of cartridge assemblies (see 4.7.1
and 4.7.4)
h.
Level of preservation and packing (see 5.1)
i.
That the safety precaution requirements of the ``Contractor's Safety Manual for Ammunition,
Explosives, and Related Dangerous Material,'' DOD 4145.26M are applicable. NOTE: When this
specification is used as part of the description of work to be accomplished by a Government
activity, the safety precaution requirements of ``Ammunition and Explosives Ashore,'' OP 5 are
applicable.
6.3 First article. When a first article inspection is required, the contracting officer should provide
specific guidance to offerors whether the items should be a first article sample or a sample selected from the
first production items (see 3.1), and the number of items to be tested as specified in 4.4. The contracting
officer should also include specific instructions in acquisition documents regarding arrangements for
examination, approval of first article test results, and disposition of first articles. Invitations for bids should
provide that the Government reserves the right to waive the requirement for samples for first article inspection
to those bidders offering a product which has been previously acquired or tested by the Government, and that
bidders offering such products, who wish to rely on such production or test, must furnish evidence with the
bid that prior Government approval is presently appropriate for the pending contract. Bidders should not
submit alternate bids unless specifically requested to do so in the solicitation.
6.4 Explosive hazard classification information.
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals