 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-46344A(MU)
of this inspection with the sample, including certificates of conformance
for materials.
4.2,2 Contractor testing.- When the contractor i.s responsible for
conducting first article approval tests, the sample shall be inspected by
the contractor for all the requirements of the contract. The sample and
a record of this inspection, including certificates of conformance for
materials, shall be submitted to the Government for approval. The Govern-
ment reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassemblies
shall be inspected in accordance with the inspection provisions contained
in Supplementary Quality Assurance Provisions (SQAP) listed in the technical
data package (TDP). In the absence of SQAP's, the applicable Quality
Assurance Provisions of MIL-F-13926 shall apply. Examination and tests
related to Section 3 herein shall be performed on a single defect (individual
characteristic) basis in accordance with MIL-STD-105 and the sampling plans
specified in Tables VI, VII and VIII herein. Examination and tests for
packaging, packing, and marking shall be in accordance with MIL-P-14232
and Section 5 herein. The tabulated classification of defects in Tables
VI, VII and VIII shall constitute the minimum inspection to be performed
by the supplier after first article approval and prior to Government
acceptance or rejection by item or lot.
TABLE VI - CLASSIFICATION OF DEFECTS
CLASS
REQUIREMENTS
TEST PROCEDURE
CRITICAL:
NONE
MAJOR: AQL 1.0% Defective
101. Vibration
3.4.3, 3.4.3.1
4.6.1.5, 4.6.1.5.1
102. Zero reference
3.5.1.1
4.6.2.1
103. 1200 meter checkpoint
3.5.1.2
4.6.2.3
104. Outer index and inner index
3.5.1.3
4.6.2.4
105. Backlash
3.5.1.4
4.6.2.5
106. Outer index and range scale
3.5.1.5
4.6.2.6
107. Servo follow-up sensitivity
3.5.1.6
4.6.2.7
108. Power operation
3.5.2
4.6.2.8
109. Output shaft tolerance
3.5.3
4.6.2.9
110. Stability
3.5.4
4.6.2.10
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals