 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-46793C(ME)
SPECIFICATION
MILITARY
MIL-T-7O4
- Treatment and Painting of Materiel.
STANDARDS
MILITARY
MIL-STD-130
- Identification Marking of US Military Property.
MIL-STD-889
- Dissimilar Metals.
(Unless otherwise indicated, copies of military specifications and standards
are available from the Standardization Documents Order Desk, Building 4D, 700
Robbins Avenue, Philadelphia, PA 19111-5094.)
2.1.2 Other Government drawings. The following other Government drawings
form a part of this document to the extent specified herein. Unless otherwise
specified, the issues are those in effect on the date of solicitation.
DRAWINGS
ME
TA13220E8285
- Cupola Body Assembly.
(Copies of drawings required by contractors in connection with specific
acquisition functions should be obtained from the USA Belvoir Research,
Development, and Engineering Center ATTN: STRBE-JBS, Fort Belvoir, VA 22060-
5606.)
2.2 Non-Government publications. The following documents form a part of
this document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted are those listed in the issue of
the DoDISS cited in the solicitation. Unless otherwise specified, the issues
of documents not listed in the DoDISS are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B 46.1 -
Surface Texture.
(Application for copies should be addressed to the American National
Standards Institute, 1430 Broadway, New York, NY 10018.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
Boiler and Pressure Vessel Code for Pressure Vessels, Section IX,
Qualification Standard for Welding and Brazing Procedures, Welders, Brazers
and Brazing Operations.
(Application for copies should be addressed to the American Society of
Mechanical Engineers, 345 East 47th Street, New York, NY 10017.)
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals