 |
|||
|
Page Title:
Table II. Trailer specifications. (Cont'd) |
|
||
| ||||||||||
|
|  MIL-C-52437C
TABLE II. Trailer specifications. (Cont'd)
VMRS No.
Feature/Requirements
VMRS 34-004
Wiring.
All wiring per SAE J163, SAE J1292,
TTMA RP No. 14, and TMC-ATA RP
Manual.
Wire identification codes per SAE J560 and
TTMA RP No. 40 or, optionally, SAE J821.
Multiple circuits combined into harnesses.
Wiring supported at max. 36-in. spacing with
anchored elastomer ties or coated clamps to
prevent whipping, chafing, and mechanical or
fatigue damage.
Interior of mechanical splicing devices
waterproofed with RTV silicone sealant. Wire
per TMC-ATA RP-110 equipped with
terminals per TMC-ATA RP-112.
Disconnect points for multiple circuits (in
excess of 4 ea.) of the waterproof plug type or
of the nut and stud juction block type.
Junction blocks coated with electrical varnish
after assembly.
Wire-to-wire terminals secured to vehicle.
For positive return ground, provide ground
wires between the front receptacle, body,
equipment, and chassis framing members.
On a metal plate or decal, provide a vehicular
wiring diagram, as actually furnished on the
trailer, per TTMA Technical Bullentin No. 65.
Circuit Breakers.
VMRS 34-004-010
Provide circuit brakers per SAE J553
protecting all live circuits between the trailer
plug(s) and the lamps.
No fuses acceptable.
Lamps Marker.
VMRS 34-004-021
All running lamps (clearance, identification,
and side marker) per SAE J592 and TMC-ATA
RP-108, either flush mount type per RP-108/1
or in-line protective lens type per RP-108/3.
49
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals