 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-53057(ME)
POWER CRANE AND SHOVEL ASSOCIATION (PCSA)
Mobile Hydraulic Crane Standards (PCSA Standard No. 4)
(Application for copies should be addressed to the Power Crane and
Shovel Association, Marine Plaza, Suite 1700 111 E. Wisconsin Ave.,
Milwaukee, WI 53202).
SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)
Rule 442 - Usage of Solvents.
(Application for copies should be addressed to the South Coast Air
Quality Management District, 9150 Flair Drive, El Monte, CA 91731.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE Handbook.
(Application for copies should be addressed to the Society of
Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096.)
TIRE AND RIM ASSOCIATION, INC. (TRA)
Tire and Rim Association Yearbook.
(Application for copies should be addressed to the Tire and Rim
Association, Inc., 3200 West Market Street, Akron, OH 44313.)
(Industry association specifications and standards are generally
available for reference from libraries. They are also distributed
among technical groups and using Federal agencies.)
2.3 Order of precedence. In the event of a conflict between the
text of this specification and the references cited in 2.1.1, 2.1.2,
and 2.2, the text of this specification shall take precedence.
3. REQUIREMENTS
3.1 Description. The crane shall be four wheel drive, pneumatic
tired, diesel engine driven, wheel-mounted, full revolving hydraulic
telescoping boom, container crane. The crane shall conform to OSHA,
ANSI, and PCSA standards as applicable.
3.1.1 Rated load. Rated load (see 6.8.1) for the crane shall be as
specified by the load rating chart for the required radius.
3.1.2 Physical characteristics.
3.1.2.1 Weight. With the crane fully fueled and serviced, the axle
weight shall not exceed 59,000 pounds for the heaviest axle. Maximum
allowable vehicle weight shall be 111,000 pounds.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals