 |
|||
|
Page Title:
Cartridge, Delay, M271 Assembly, Drawing 10551590. |
|
||
| ||||||||||
|
| MIL-C-60872A
of 4.6 and all the test procedures of 4.7 except for 4.7.7.
4.6 Examination. All cartridges and components shall be examined visually and radiographically and
characteristics defined in accordance with the applicable drawings. One hundred percent examination shall
be performed for all critical defects. Examination for major or minor defects shall be performed on a defect
basis in accordance with the classification of defects. Four power (4X) magnification may be used in
performing visual examination for such defects as burrs and foreign matter. When compliance is in doubt as
a result of visual inspection, the characteristic shall be measured or gaged to determine acceptability. All
nonconforming items shall be rejected.
4.6.1 Cartridge, Delay, M271 Assembly, Drawing 10551590.
Characteristic
Defect
Method of Inspection
Critical
1
Any part missing
X-ray/Visual
2
Improper assembly
X-ray/Visual
3
Mixed delay elements or propellant
Visual
4
Metal defective
Visual
5
Crimp missing or incorrect
Visual
6
Marking missing, incorrect, or illegible
Visual
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals