Click here to make tpub.com your Home Page

Page Title: Inspections to be performed
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-60985A (MU)
and materials, including packaging and packing, shall be obtained from the
same sources of supply as will be used in regular production.  The sample
shall be accompanied by certificates of conformance.  A first article quantity
or portion thereof, as directed by the Contracting Officer, shall also be
submitted whenever there is a lapse in prodction for a period in excess of 90
days, or whenever a change occurs in manufacturing process, material used,
drawing, specification or source of supply as to significantly affect product
uniformity as determined by the Government.  Prior to submission, the contractor
shall inspect the sample to the degree necessary to assure that it conforms to
the requirements of the contract and submit a record of this inspection with
the sample.  A sample containing known defects will not be submitted unless
specifically authorized by the Contracting Officer.
Inspections to be performed. -Components will be subjected by the
4.2.2
Government
to any or all the examinations or tests specified in this specifi-
cation and
any or all requirements of the applicable drawings.  In addition,
any or all
of the following examinations and tests will be performed:
4.2.2.1 Quantities for first article inspection. -After classification of
defects and other inspections have been performed as specified in 4.2.2, the
following quantities shall be subjected to the indicated tests:
4.2.2.1.1  Hydrostatic test of cartridge case. -Each of the one hundred (100)
cartridge cases less vent holes shall be subjected to this test.  This test shall
be performed as specified in Paragraph 4.4.1 Code No. 05001.
4.2.2.1.2 Hardness. -One hundred (100) cartridge cases shall be subjected
to this test.
4.2.2.1.3 Salt spray .-Ten (10) of each applicable part shall be subjected
to the test.
4.2.2.1.4 Diameter of vent holes. -Twenty-five (25) cartridge cases shall
be sectioned and the diameter of each vent hole measured by any method satis-
factory to the Contracting Officer.
4.2.3 Rejection. -If any component fails to comply with any of the applic-
able requirements, the first article quantity shall be rejected.  The Govern-
ment reserves the right to terminate its inspection upon any failure of an
assembly or component in the sample to comply with any of the stated requirements.
5

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business