 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-62205B(AR)
3. REQUIREMENTS
3.1 Fabrication. The Mirror/A-Trigger and Buffer Circuit Card Assembly,
herein referred to as the asembly, shall be manufactured in accordance with
Drawing 11743417 and drawings pertaining thereto and, when assembled, shall
meet the requirements of this specification. (See 4.5.1)
3.1.1 Function. The assembly shall provide the following functions:
Designation
a.
Continuity
b.
A-trigger
c.
Video signal
d.
MALF 3 signal
e.
Reset signal
f.
Test range signal
g.
Reticle light signals
h.
115V angle signals
i.
Laser feedback signal
j.
Stator signal
k.
TPG inhibit (1) and min rng inhibit
(3) signals
3.1.2 General specifications. The following provisions of MIL-F-13926
apply: (See 4.5.1)
a.
Order of precedence
b.
Dimensions and tolerances
c.
Inorganic protective surface finishes
d.
Part identification and marking
e.
Workmanship
3.1.3 Ambi)ent conditions. Standard ambient conditions shasll be as
follows:
73 18F
a. Temperature
50 percent 30 percent
b. Relative humidity
28.5 + 2.0 3.0 in. Hg.
c. Atmospheric pressure
3.2 First article. When specified (see 6.2) the contractor shall
furnish sample units for first article inspection and approval (see 4.4 and
6.2).
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals