 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-63550E(AR)
5.1.2 Level B. For level B (intermediate-term storage), the assembly shall
be preserved and packed as for level A, except that methods and materials
shall be as specified in MIL-P-14232.
5.1.3 Level C. For level C (immediate use upon delivery), the asssembly
shall be preserved and packed in accordance with industrial packaging prac-
tices and ASTM D 3951. Packages which require overpacking for acceptance by
common carrier shall be overpacked in uniform quantities in a manner to ensure
carrier acceptance at the lowest freight rates and to ensure safe delivery
from the supply source to the first receiving activity.
5.1.4 Data requirements. The contractor shall prepare packaging data for
level A only, as follows:
a. Additional packaging information not presented on the
cable assembly drawing but essential to completeness
of packaging data.
b.
Packaging procedures as required by MIL-STD-794.
These procedures shall provide for adequate protection
against corrosion, deterioration, and damage during
shipment.
5.2 Marking. Each inner and outer container shall be marked in accordance
with MIL-STD-129 and the following:
Part number.
a.
Nomenclature.
b.
c. Quantity.
Purchase order/contract number.
d.
e. Serial number.
f.
Date of manufacture.
NOTES
6.
6.1 Intended use. The cable assemblies are intended to provide electrical
interconnection between operating components of the M247 gun system. Each
cable assembly will provide environmental, mechanical, and EMP protection for
individual electrical wiring. The connectors on each assembly are keyed to
minimize the possibility of improperly mating cables to equipment.
26
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals