Click here to make tpub.com your Home Page

Page Title: Classification of inspections
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-63990C (AR)
4.
QUALITY ASSURANCE PROVISIONS
4.1  Responsibility or inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as
otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for
the performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in this
specification where such inspections are deemed necessary to
ensure supplies and services conform to prescribed requirements.
All items shall meet
4.1.1 Responsibility for compliance.
all requirements of Sections 3 and 5. The inspection set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract. Sampling
inspection, as part of manufacturing operations, is an acceptable
practice to ascertain conformance to requirements, however, this
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to accept
defective material.
4.1.2 General provisions. Unless otherwise specified
herein, the provisions of MIL-A-48078 apply and form a part of
this specification. Reference shall be made to MIL-STD-109 to
define quality assurance terms used herein.
4.2 Inspection equipment.  Shall comply with MIL-A-48078
(Inspection Equipment) and MIL-A-2550 (Test and measuring
equipment).
4.3  Classification of inspections The inspection
requirements specified herein are classified as follows:
First article inspection (see 4.4).
a.
Quality conformance inspection (See 4.5).
b.
7

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business