 |
|||
|
Page Title:
First article (initial production) approval. |
|
||
| ||||||||||
|
|  MIL-C-70492(AR)
3.5 First article. When specified in the contract, a sample
shall be subjected to first article inspection (See 4 and 6).
3.6 workmanship. "The workmanship requirements of MIL-F-13926
and MIL-STD-454 shall be met. All components shall be fitted
property and firmly in their respective positions. All electrical
connections shall be mechanically secure and electrically sound.
`There shall be no evidence of corrosion, burrs, roughness, sharp
edges or other defects which could adversely affect its use or
suitability for the purpose intended.
3.7 Materials. " Materials shall be in accordance with
drawings, material specifications and general specifications
forming a part of this specification.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of a11 inspection requirements as
specified herein. Except as otherwise specified in the contract
or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the
Government. "The Government reserves the right to perform any of
the inspections set forth in this specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 General provisions. "The component and subassembly
inspection requirements of MIL-F-13926 and MIL-STD-454 form a
part of the Quality Assurance Provisions of this specification.
Definitions of inspection terms shall be as "listed in MIL-STD-109.
4.2 First article (initial production) approval. The
requirement for first article approval and the responsibility
(Government or contractor) for first article testing shall be as
specified in the contract. "The sample for first article approval
test shall consist of three (3) modem circuit card assemblies plus
three (3) each of all items covered by QAP. The three modem
circuit card assemblies shall be tested as specified herein for
all the requirements of this specification. The items covered by
QAP shall be tested, as specified thereon, for all characteristics
delineated on the QAP. The samples shall be manufactured in the
same manner, using the same materials, equipment, processes, and
procedures as will be used in the production of the balance of the
contract quantity. All parts amd materials, including packaging
and packing, shall be obtained from the same source of supply as
will be used in the production of the balance of the contract
quantity.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals