 |
|||
|
Page Title:
Table II. Classification of defects. |
|
||
| ||||||||||
|
|  MIL-C-70494(AR)
4.3 Inspection provisions.
4.3.1 Submission of product. Unless otherwise specified by
the contracting officer, Inspection lot size, lot formation, and
presentation of lots shall be in accordance with "Submission of
Product" provision of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. All components and
subassemblies shallbe inspected. In accordance with the inspection
provisions contained in Quality Assurance Provisions (QAP'sj
listed in the Technical Data Package (TDP).
In the absence of
QAP's, the applicable Quality Assurance Provisions of MIL-F-13926
shall apply.
4.4
Sampling.
4.4.1 Environmental/performance. The interface shall be
inspected to the requirements in Table II.
TABLE II.
Classification of defects.
Characteristics
Requirement
Test Procedure
100% Inspection
1.
Audio to FM radio
3.2.1.1
4.6.3.1
2.
Audio to AM radio
3.2.1.2
4.6.3.2
Wireline output
3.
3.2.1.3
4.6.3.3
4.
Clipped frequency
shift keying
3.2.1.4
4.6.3.4
Radio input
5.
3.2.1.5
4.6.3.5
6.
Wireline input
3.3.1.6
4.6.3.6
7.
Common connector
contact continuity
3.3.1.7
4.6.4
8.
ESS temperature
3.3.2
4.6.1
ESS vibration
9.
3.3.3
4.6.2
MAJOR:
AQL 1.0% Defective
101.
Workmanship
3.6
4.6.5
4.4.2 Special sampling. One interface shall be selected at
random as a special sample from each lot or each 100 produced
which ever occurs first. The-sample shall meet the requirements
and tests in Table III.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals