4.7.21 Defect penalty. In any ballistic test in which the
occurrence of a firing defect prevents a reliable result for the
characteristic being tested, an additional shot shall be fired.
That particular test shall not be penalized, but the defect shall
be added to the function and casualty defect count for each weapon
4.7.22 Packaging, packing and marking. Inspections for
linking, packaging, packing and marking shall be in accordance
with MIL-STD-644 as applicable to the drawing or as required by
the contract. During or immediately prior to the packaging
operation, 100% examination of the cartridges shall be performed
to ascertain that the cartridge type conforms to the drawing.
All non-conforming cartridges shall be rejected.
4.7.23 Inspection equipment. The contractor shall submit
inspection equipment designs for approval in accordance with the
terms of the contract.
(See Section 6 of MIL-A-48078 and 6.3