 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-232222A(AS)
2.2
(Cont)
National Aeronautics and Space Administration
Technical Report NO. 1235
Standard Atmosphere-Table and Data for alti-
tudes to (Application for copies should be
addressed to the Superintendent of Documents,
Government Printing Office, Washington, D. C.)
American Society of Mechanical Engineers
ASA
Y10.7 - 1954 American standard Letter Symbols
for Aeronautic Sciences. (Copies of this
ASME document may be obtained from American
Society of Mechanical Engineers, West 39th
Street, New York.)
Naval Air Test Center
might Test, Rotary Wing Manual (June 1959).
Naval Air Engineering Center
NAEC-ACEL Report 533 Anthropometry of Naval
Aviators.
3.
REQUIREMENTS
3.1
GENERAL
3.1.1
LOCATIONS FOR TESTS.- Throughout this speci-
fication, the expression "contractor's plant"
refers to the contractor's flight-test facilities. Flight-test facilities
other than the contractor's may be approved by test authority for parti-
cular demonstration tests. Unless such changes in locations for certain
tests are so approved, all specified demonstration tests shall be per-
formed at the contractor's plant except as follows:
(1) Dives and pull-outs with and without stores; flying
qualities and performance; taxi, take-off. and
landing; and hydrodynamic tests shall be performed
at the NAVAIRTESTCEN. Shipboard suitability tests
shall be performed by NAVAIRTESTCEN.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals