 |
|||
|
Page Title:
Test of Control Logic and Hydraulic Circuits |
|
||
| ||||||||||
|
|  MIL-D-63303B(AR)
4.6.2.7.3.10 TEST OF CONTROL LOGIC AND HYDRAULIC CIRCUITS.
a. Complete the BACP set-up. Set the Pattern switch on the
OCP to 1. Then set the Mode switch on the OCP to DISPENSE. L1, L4,
L6, L38 and L43 should come on.
b. Move S18 to the right. L63, L67 and L60 should go off.
L33, L57 and L66 should come on. The Engine Running lamp on the OCP
should go off, the Malfunction lamp should come on.
c. Move S18 to the left. L63 should come on and L57 should
go off. The Malfunction lamp on the OCP should go off.
L33 and L66 should go off and L67 should come
Push S9.
d.
on.
Set the Mode switch on the OCP to OFF.
e.
f. Move the Engine switch on the OCP to START. L60 and L51
should come on. The Engine Running lamp on the OCP should come on.
L51 should go off.
Release the Engine switch.
g.
4.6.2.7.3.11 TEST OF LEFT LOAD CIRCUITS.
Complete the BACP set-up. Set the Mode switch on the
OCP to LOAD/UNLOAD. L39 should then come on.
L24,
b. Set the Left Magazine switch on the OCP to LOAD.
L44 and L74 should come on.
L73 should come on.
Press S26.
c.
L73 should go off.
Press S32.
d.
TEST OF RIGHT LOAD CIRCUITS.
4.6.2.7.3.12
L26,
a. Set the Right Magazine switch on the OCP to LOAD.
L47 and L82 should come on.
L81 should
Press S33.
L81 should come on.
Press S27.
b.
go off.
Turn off Load/Unload switches and Mode Select switch on
c.
OCP l
4.6.2.7.3.13 TEST OF DISPENSE CIRCUITS.
Complete BACP set-up. Set Pattern Selector on OCP to
1. Set the Mode switch on the OCP to DISPENSE; Ll, L4, L6, L38 and
L43 should come on.
45
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals