 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-70602(AR)
4.4.3 Testing. Testing is described in the First Article and
Quality Conformance Inspection Tables.
4.4.4 Inspection equipment. The inspection equipment
required to perform the inspections and test prescribed in this
specification is identified in the "Paragraph Reference/Inspection
Method" column in the table starting with paragraph 4.4.2.1, and
the test method paragraph (see 4.5). The contractor shall submit
for approval inspection equipment designs in accordance with the
terms of the contract. See Section 6 of MIL-A-48078, and 6.3
herein.
4.5
Methods of inspection.
Not applicable
5. PACKAGING
5.1 Packaging.
5.1.1 Level C. Packing and marking shall be in accordance
with Specification MIL-STD-1169.
NOTES
6.
6.1 Ordering data.
See MIL-A-48078.
6.2 Data cards. (See MIL-A-48078). Distribution of data
cards shall include the following: Commander, US ARDEC, ATTN:
AMSMC-QAT-M(D), Dover, New Jersey 07801-5001.
6.3 Submission of inspection equipment designs for approval.
(See MIL-A-48078). Equipment designs shall be submitted as
required to: -Commander, US ARDEC, ATTN: AMSMC-QAT-I(D), Dover,
New Jersey 07801-5001.
6.4 Drawings. Drawings listed in section 2 of this
specification under the heading US Army Armament Research,
Development and Engineering Center (ARDEC) may also include
drawings prepared by and identified as US Army Armament Research
and Development Command (ARRADCOM), Edgewood Arsenal, Frankford
Arsenal, Rock Island Arsenal or Picatinny Arsenal drawings.
Technical data originally prepared by these activities are now
under the cognizance of ARDEC.
6.5 Changes from previous issue. Asterisks are not used in
this revision to identify changes with respect to the previous
issue, due to the extensiveness of the changes.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals