Click here to make tpub.com your Home Page

Page Title: Quality Assurance Provisions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-E-22200G
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection.  Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the performance of
all inspection requirements (examinations and tests) as specified herein.  Except
as otherwise specified in the contract or purchase order, the contractor may use
his own or any other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government.  The Govern-
ment reserves the right to perform any of the inspections set forth in this
specification where such inspections are deemed necessary to ensure supplies and
services conform to prescribed requirements.
4.1.1 Responsibility  forcompliance.  All items must meet all requirements
of sections 3 and 5.  The inspections set forth in this specification shall
become a part of the contractor's overall inspection system or quality program.
The absence of any inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all products or supplies
submitted to the Government for acceptance comply with all requirements of the
contract.
Sampling inspection, as part of the manufacturing operations, is an
acceptable practice to ascertain conformance to requirements, however, this does
not authorize submission of known defective material, either indicated or actual,
nor does it commit the Government to accept defective material.
4.2 Classification of inspections.
The inspection requirements specified
herein are classified as follows:
(a) Qualification inspection (see 4.3).
(b) Quality conformance inspection (see 4.4).
4.2.1 Ispection conditions. Unless otherwise specified (see 6.2), all
inspections shall be performed in accordance with the conditions specified
herein.
Environmental conditions shall be ambient laboratory conditions.
4.3 Qualification inspection.  Qualification inspection shall be conducted
at a laboratory satisfactory to NAVSEA.  The inspection shall consist of the
examinations and tests specified in 4.5, 4.6 and the applicable detail specifi-
cation (see 3.1).
4.3.1 Inspection system.  The manufacturer shall provide and maintain an
inspection system acceptable to the Government for supplies and services covered
by this specification.  The inspection system shall be in accordance with
MIL-I-45208.
4.3.2 Special instructions.  Qualification will be authorized only to manu-
facturers of welding electrodes.  When applying for test authorization, or after
tests have been authorized and when samples are submitted, the manufacturer shall
furnish the information specified in 4.3.2.1.
(NOTE:  This information, together
with test results obtained with the electrode sample, shall form a part of the
qualification test; all information will be held in confidence by the Government.)

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business