|
| MIL-E-23765B(SH)
Notes to figure 2:
Flange and barrel material shall be nonconductive, and of such con-
1.
struction to carry the net weight of the specified electrode and
retain stability under handling, shipment, storage, and use. spools
shall be constructed of hardboard flanges and cardboard barrels.
Plastic spools may be used.
2*
All dimensions in inches.
Dimension B shall be such as to permit proper feeding of electrode.
30
4.
Flanges shall not be out of parallel more than 3/16 inch. Flanges
shall not toe in.
The ends of the electrode shall be securely fastened to the hub and
5.
either flange by any means that permit accessibility to the starting
end, while satisfactorily retaining the electrode on the spool until
used and, moreover, does not interfere with unspooling operation
during use.
Spooled electrode shall be labelled and identified as to type and size
6.
of electrode in accordance with commercial practice.
Spool rim may be provided with a removable plug (one side only).
7.
24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |