4.3.3 Control tests. - Three elbow assemblies shal be selected and
meet the requirements and tests of Table V. These tests shall be conducted
as follow-up tests to the first article samples at 25 percent, 50 percent
and 75 percent completion of the production contractc
4.3.4 General. - One.elbow assembly shall be selected at random as
a special sampling from each 100 produced. The sample shall meet the
requirements and tests in Table VI.
4.4 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Acceptance
and Rejection" as specified in MIL-STD-105.
4.5 Inspection equipment.- Except as otherwise provided for by hte
contract, the contractor shall supply and maintain inspection equipment
in accordance with the applicable requirements of MIL-I-45607.
4.5.1 Government furnished inspection equipment.- Where the contract
provides for Government furnished test equipment, supply and maintenance of
test equipment shall be in accordance with applicable requirements specified
4.5.2 Contractor furnished inspection equipment.
18.104.22.168 Governmant design. - All inspection equipment specified by
drawing number in specifications or SQAP forming a part of the contract
shall be supplied by the contractor in accordance with technical data
included in the technical data package list.