Classification of defects.

Page Title: Classification of defects.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-F-11673F(EA)

4 . 2 . 2 . 2 For destructive test. Sampling shall be conducted in accordance

with MIL-STD-105 using level S-4.

4 . 2 . 3 Inspection procedure.

4 . 2 . 3 . 1 For examination. Sample fuzes and the level A packaging shall be

examined in accordance with the classification of defects and with MIL-STD-105.

During each hour of production, a sample of ignition mix shall be drawn from

the outlet of the ignition mix hopper and tested in accordance with 4.2.4.3.

4 . 2 . 3 . 2 For destructive test.

Sample fuzes shall be tested in accordance

w i t h 4.2.4. Disposition of the lot represented by the sample fuzes shall be

determined in accordance with MIL-STD-105, using an AQL of 1.0 percent defec-

t i v e . Disposition of the lot represented by the sample containers shall be

determined by using an AQL of 1.0 percent defective in lieu of the 4.0 percent

defective specified in MIL-P-116.

4 . 2 . 3 . 3 C r i t i c a l c h a r a c t e r i s t i c s . Each fuze in the lot shall be examined

f o r its critical characteristic listed in the classification of defects.

4 . 2 . 3 . 4 Classification of defects.

(a) Fuze, smoke pot, floating, electric, M209 (Drawing 36-7-25).

Defects