 |
|||
|
|
|||
| ||||||||||
|
| MIL-F-15733/24C
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
Case: Metal.
Case and mounting hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Solder lug.
Operating temperature range: -55 to +125C.
Rated voltage: 28 volts, dc (derated from 50 volts, dc at 85C).
Rated current: See table I.
Insertion loss: In accordance with MIL-PRF-15733 and table I.
Seal: In accordance with MIL-PRF-15733.
Capacitance to ground: Not applicable.
Temperature rise: 25C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733 except the duration of application of voltage
shall be 1 to 5 seconds.
Barometric pressure (reduced): In accordance with MIL-PRF-15733 except use Method 105, MIL-STD-202; test
condition D (100,000 ft).
Insulation resistance: In accordance with MIL-PRF-15733 and the following:
Test temperature: 25C.
Test potential: Rated dc voltage.
Insulation resistance: Shall be not less than 100 megohms.
Voltage drop: See table I.
Overload: In accordance with MIL-PRF-15733. After the filter has returned to room temperature, insulation
resistance and voltage drop measurements shall meet initial requirements.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition A (pull).
Force: 5 pounds.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition B.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202; test condition I.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202; test condition D (20g).
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals