Click here to make tpub.com your Home Page

Page Title: Requirements
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




MIL-F-15733/53C
REQUIREMENTS:
Dimensions and configuration: See figure and table 1.
Case: Metal.
Case and hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals: Threaded stud.
Operating temperature range: -55C to +125C.
Rated voltage: (over the rated temperature range of -55 to +125C): See table II.
Rated current: 20 amperes dc.
Insertion loss: In accordance with MIL-PRF-15733 and table II.
Seal: In accordance with MIL-PRF-15733.
Temperature rise: 25C, maximum.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733 except the test voltage shall be two times the
rated voltage applied between either terminal and case.
Insulation resistance: In accordance with MIL-PRF-15733. Insulation resistance measured at 25C between
either terminal and the case shall be at least 550 megohms.
Voltage drop: 1 percent of rated voltage, maximum.
Terminal strength: In accordance with MIL-PRF-15733 and Method 211, MIL-STD-202; test condition E.
Applied force: 14 pounds.
Flashpoint of impregnant or potting compound: In accordance with MIL-PRF-15733.
Salt atmosphere (corrosion): In accordance with MIL-PRF-15733 and Method 101, MIL-STD-202; test condition A.
Shock (specified pulse): In accordance with MIL-PRF-15733 and Method 213, MIL-STD-202; test condition I. The
following exceptions shall apply:
Mounting: Filters shall be rigidly mounted by the body.
Insertion loss test: Not applicable.
Vibration, high frequency: In accordance with MIL-PRF-15733 and Method 204, MIL-STD-202; test condition B.
The following exception shall apply:
Electrical current load shall not be applied to filters during the vibration test
Life: In accordance with MIL-PRF-15733 and method 108, MIL-STD-202; test condition B.
3

Privacy Statement - Press Release - Copyright Information. - Contact Us