Quality Assurance Provisions

Page Title: Quality Assurance Provisions
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-F-4 6673 [AR)

3.10.11 Explosive atmosphere. Operation after being subjected

to MIL-STD-810, Method 511.l, procedure I, excePt test .to . be limited

.. .

to a maximum altitude of 20,O00 feet

3.10.12 Sand and dust. Operation after being subjected to

MIL-STD-81O, Method 510.1, Procedure I. Step 3 may proceed

immediately after stabilization in Step 28 if desired.

3.10.13 Workmanship. The workmanship shall conform to the

general requirements of MIL-T-28800 and MIL-STD-454.

QUALITY ASSURANCE PROVISIONS

4.1 Respo nisibility for inspection. Unless otherwise specified

in the contract, the contractor is responsible for the performance

of all inspection requirements as specified herein. Except as

otherwise specified in the contract~ the contractor may use his own

or any other facilities suitable for the performance of the

inspection requirements specified herein, unless disapproved by the

Government. The Government reserves the right to perform any of the

inspections set forth in the specification where such inspections

are deemed necessary to assure supplies conform to prescribed

requirements.

4.1.1 Responsibility for compliance. All items must meet all

requirements of sections 3 and 5. The inspection set forth in this

specification shall become a part of the contractor's overall

inspection system or quality program. The absence of any inspection

requirements in the specification shall not relieve the contractor

of the responsibility of assuring that all products or supplies

submitted to the Government for acceptance comply with all

requirements of the contract. Sampling in quality conformance does

not authorize submission of known defective material, either

indicated or actual, nor does it commit the Government to acceptance

of defective material.

4.2 Classification of inspections. The inspection requirements

specified herein are classed as follows:

First article inspection (see 4.4).

Quality conformance inspection (see 4.5).

4.3 Inspe ction conditions. Unless otherwise specified herein,

all inspection shall be performed in accordance with the quality

assurance provisions of MIL-F-13926.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business