Click here to make tpub.com your Home Page

Page Title: Inter-plant shipment
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Cycling burn-in.
Up
Filter Unit, Gas-Particulate: 400 400 CFM , 208 V, 400 Hz, M159
Next
Submission of alternative inspection provisions.



img
to drive open, the horn shall sound and the MASK indicator shall light as specified.
(e) Measure the rotational speed of the fan assembly with a stroboscope. The rota-
tional speed shall be as specified.
5.
PACKAGING
5.1 Inter-plant shipment (see 6.4). Military packaging as specified in 5.2 is not applica-
ble to interplant shipments. The filter units shall be packaged to provide adequate protec-
tion from physical damage, and marked to identify the filter units and provide any other
required data during shipment from the source to the first receiving activity.
5.2 Military packaging.  For all shipments, other than interplant shipments (see 6.4),
packaging (preservation, unit packing, packing, and marking) shall be as specified in SPI
P5-19-6699.
6. NOTES
(This section contains information of a general or explanatory nature that may be help-
ful, but is not mandatory.)
6.1 Intended use. The M59 gas-particulate filter unit covered by this specification is
designed to maintain a positive internal pressure in vans, vehicles and shelters using a
filtered airflow to prevent the infiltration of hazardous levels of chemical and biological
agents.
6.2 Acquisition requirements. Acquisition documents must specify the following:
(a) Title, number, and date of this specification
(b) Issue of DODISS to be cited in the solicitation, and if required, the specific
issue of individual documents referenced (see 2.1)
(c) First article:
(1) Time allowed for contractor submission of samples for Government test
and evaluation after award of contract when testing is performed by the Government.
(2) Name and address of test facility and shipping instructions when testing is
performed by the Government.
(3) Time required for the Government to notify the contractor whether or not
to proceed with production.
(d) Level of packing required
6.3 Airflow valve. The terms open and closed, used in this specification to describe the
position of the airflow valve, refer to the port marked "TO SHELTER". The valve door

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +