 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-63446B (AR)
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contractor purchase
order, the contractor is responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as otherwise specified in the contractor
purchase order, the contractor may use his own or any other facilities suitable for the performance
of inspection requirements specified herein, unless disapprove by the Government. The
Government reserves the right to perform any of the inspections set forth in the specification
where such inspections are deemed necessary to ensure supplies and services conform to
prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet all requirements of sections 3 and
5. The inspection set forth in this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection requirements in the
specification shall not relieve the contractor of the responsibility of ensuring that all products or
supplies submitted to the Government for acceptance comply with all requirements of the
contract. Sampling inspection, as a part of manufacturing operations, is an acceptable practice to
ascertain conformance to requirements, however, this does not authorize submission of known
defective material, either indicated or actual, nor does it commit the Government to accept
defective material.
4.1.2 General provisions. Unless otherwise specified herein, the provisions of MIL-A-
48078 apply and form a part of this specification. Reference shall be made to MIL-STD-109 to
define quality assurance terms used herein.
4.2 Classification of inspections. The following types of inspection requirements specified
herein are classified as follows:
a. First article inspection (see 4.3).
b. Quality conformance inspection (see 4.4).
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a frost article sample as designated by the
Contracting Officer for evaluation in accordance with provisions of 4.3.2. The first article sample
shall consist of the assemblies, components and test specimens listed below in the quantities
indicated.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals