Click here to make tpub.com your Home Page

Page Title: Test and inspection equipment and facilities.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-F-81150A(OS)
4.4.2 Test and inspection equipment and facilities. The manufacturer
shall furnish and maintain all necessary test equipment and facilities
and shall provide personnel for performing all quality conformance tests.
The test equipment shall be adequate in quantity and, when definite re-
quirements are not specified, shall be of sufficient accuracy and quality
to permit performance of the required tests.
4.4.3 Test equipment.  The following test equipment is required for
performing the quality conformance tests of the bandpass filter:
Western Electric 17B, or equivalent.
4.4.3.1 Oscillator:
Hewlett-Packard 521C, or equivalent.
4.4.3.2 Electronic counter:
Ballantine Model 300, or equivalent.
4.4.3.3 Voltmeter:
4.4.3.4 Insulation tester:
Radio Frequency Laboratories Model 184C or
equivalent.
4.4.3.5 Dielectric tester:  An instrument that will provide a 200 plus
or minus 10 vdc test potential and a device to indicate a dielectric break-
down.
4.4.3.6 Resistors:  200,000 ohms plus or minus 1 percent, 0.5 watt;
MIL-R-10509 designation RN70B2003J; two required.
single phase.
115 volts, 60
4.4.3.7 Power source:
HZ
4.4.3.8 power supply:  Capable of delivering 90 vdc at a load current
of 0.01 ampere with less than 3 percent ripple.
4.4.3.9 Resistor, variable:  10,000 ohms plus or minus 10 percent, 2
watts; MIL-R-94 designation RV2NAXD103A.
O to 20 made, plus or minus 2 percent accuracy.
4.4,3.10
Millianmeter:
4.4.3.11  Resistor:  150,000 ohms plus or minus 1 percent, 0.5 watt;
MIL-R-10509 designation RN70B1503J.
4.4.3.12  Resistor:  180,000 ohms plus or minus 1 percent, 0.5 watt;
MIL-R-10509 designation RN70B1803J.
4.4.3.13  Resistor:  190,000 ohms plus or minus 1 percent, 0.5 watt;
MIL-R-10509 designation RN70B1903J.
4.4.3.14  Resistor:  210,000 ohms plus or minus 1 percent, 0.5 watt;
MIL-R-10509 designation RN70B2103HJ.
8

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business