Click here to make tpub.com your Home Page

Page Title: Figure 1. Film, Photographic, 105-mm Dimensions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Proprietary Names and Drawings
Up
Film-Tapes, Semiautomatic Test
Next
Table 1. Maximum Permissible Dimensional Changes



img
MIL-F- 81526 B(AS)
3.4 Detail Requirements - The Film-Tapes shall meet the following detail
requirements:
3.4. 1 Film-Tape Dimensions - The Film, 105mm, dimensions before
processing and treatment shall be as shown in Figure 1.
The base thickness shall be O. 0025 + O. 0002 and maximum
a.
thickness O. 0030.
b.
The length of any 100 consecutive perforations shall be
18.700 + 0.015 CL to CL.
c. The dimensions and tolerances shown in Figure 1 apply to the
material immediately After cutting and perforating, and when
the film is in equalibrum with a relative humidity of 50 percent
at an ambient temperature of 22.2 + 1. 6C (72 + 30F)
3.4. 1.1 Film-Tape Thickness - The thickness of the Film-Tape with
emulsion shall not exceed O. 0032 inch.
3.4. 1.2 Film-Tape Length - The length of the Film-Tape, including
leader and trailer ends, shall not exceed 75 feet for BIT, and 240 feet
for FIM.
Figure 1. Film, Photographic, 105-mm Dimensions
5

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +