Click here to make tpub.com your Home Page

Page Title: Remote setting system
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Steering gyro motor
Up
Gyro, Steering
Next
Quality Assurance Provisions



img
MIL-G-19027D(OS)
3.3.6 Remote setting system. The remote setting system must operate
compatibly with current Fire Control Systems or their equivalent.
3.3.6.1 Setting accuracy.  The gyro must be capable of setting within
plus or minus 0.75 degree of any angle set on the fire control system.
3.3.6.2
Slewing speed. The gyro must have a slewing speed of at least
35 degrees per second.
3.3.7 Insulation.  All wiring shall withstand a hi-pot test of 500
volts, 60 Hz for one minute between ground and all pins (connected to-
gether) of P201, NAVORD Drawing 2413255, and between all mutually insu-
lated pins.
3.3.8 Insulation resistance.  The insulation resistance at 500 volts
plus or minus 50 volts dc, between ground and all pins (connected to-
gether) of P201, NAVORD Drawing 2413255, and between all mutually insu-
lated pins, shall be greater than twenty megohms.
3.3.9  Operating life. The steering gyro shall have an operating life
of 500 cycles of 10 minutes per cycle, as. described in 4.4.3.
3.4 Environmental requirements.  The steering gyro shall meet the other
applicable requirements of this specification during or after the tests
defined or specified in 4.4.
3.4.1 Vibration.
The steering gyro shall meet the following vibration
requirements:
3.4.1.1 Vibration, nonoperating.  The steering gyro shall show no dam-
age and shall meet all the performance requirements and product charac-
teristics of this specification after being tested as in 4.4.1.2.
3.4.1.2 Vibration, operating.  The steering gyro shall show no damage
and shall meet all the performance requirements and product characteris-
tics of this specification during and after the test specified in 4.4.1.3.
3.4.2 Temperature and humidity
3.4.2.1 High temperature and humidity, nonoperating.  The steering gyro
shall show no damage and shall meet all the performance requirements and
product characteristics of this specification after being tested as in
4.4.2.1.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +