 |
|||
|
|
|||
| ||||||||||
|
|  MIL.G.45981(WC)
3.8 Workmanship. The workmanship shall be in accordance with
MIL-W-13855.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibilitv for inspection. Unless otherwise specified in
the contract, the contractor is responsible for the performance of all
inspection requirements as specified herein, Except as otherwise speci-
fied in the contract, the contractor may use his own or any other
facilities suitable for the performance of the inspection requirements
specified herein, unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in the
specifications where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.2 Quality assurance terms and definitions. Quality assurance
terms and definitions used herein are in accordance with MIL-STD-109.
4.3 Classification of inspection. The inspection requirements
specified herein are classified as follows:
a. First article inspection (see 4.4).
b. Quality conformance inspection (see 4. 5).
4.4 First article inspection, The first article (initial produc-
tion unit(s) shall be submitted for inspection in accordance with the
contract (see 6.2). The first article shall be representative of the
production processes to be used during quantity production. The first
article shall be subjected to the Quality Conformance inspection (see
4.5), Towing and Fording test (see 4.6,30), Environmental test (see
4.6.31), Electromagnetic interference test (see 4.6.33) and such other
inspection as necessary to determine that ail requirements of the con-
tract have been met.
4.5 Quality conformance inspection.
4.5.1 Examination.
4.5.1.1 Component parts and concurrent repair parts. Examination
of component parts and concurrent repair parts shall be performed in
accordance with the criteria specified in the contract (see 6.2). The
examination of these parts shall. be accomplished prior to their assembly
into the end item or submission for acceptance as repair parts.
4.5.1.2 Material and construction examination. Each weapon system
shall be visually examined to determine compliance with 3.2, utilizing
Government approved inspection procedures.
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals