 |
|||
|
|
|||
| ||||||||||
|
|  MIL-G-48204(MU)
4.2 First article inspection. Not applicable.
4.3 Quality conformance inspection.
4.3.1 Lot formation.
4.3.1.1 Production lot. A lot shall consist of parts and
assemblies produced by one manufacturer in one unchanged pro-
-
cess, in accordance with the same drawing, same drawing revi
sion, same specification and same sPecification revision.
Drawing, specification and process changes not affecting
safety, performance, storage, or interchangeability, as de-
termined by the Government, shall not necessitate changing
the lot interfix number. The criteris and procedures for the
assignment of lot numbers shall be in accordance with MIL-STD-
1168.
4.3.1.2 Inspection lot. A lot or batch and its forma-
tion, size, and presentation is described in MIL-STD-105, Sec-
tion 5. Accordingly, a lot shall mean an inspection lot and a
batch shall mean an inspection batch for the purpose of this
specification. The manner in which each inspection lot or
batch is to be presented and identified by the contractor
shall be designated or approved by the Government representa-
tive.
4.3.2 Product inspection examination. Critical charac-
teristics shall require 100 percent inspection of all items
in the inspection lot. A sample shall be selected at random
from each inspection lot in accordance with the applicable
major or minor characteristic table (see Table I and Table II),
and inspected for all characteristics in the applicable classi-
fication. Any characteristics in the sample found to be de-
fective shall reject the inspection lot. Sequence for the in-
spection of characteristics in each classification need not
be followed, as long as all characteristic inspections are
performed.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals