Dielectric Withstanding Voltage.

Page Title: Dielectric Withstanding Voltage.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-G-58103

3.6 Performance.

3.6.1 Switch Operation. All switches shall be operable without undue

hand repositioning for normal operation of switches by the thumb and fore-

finger. The wearing of authorized gloves shall not unduly reduce the fa-

cility of operation of any switch nor the switch guard. Actuating force

and actuator throw distance for the switches shall be as prescribed in their

respective specifications. There shall be no binding of actuation nor

limitation of travel due to fit of the switches on/in the body of the grip,

On-off positioning of the switch actuator shall result in positive make-

break contact action.

3.6.2 Dielectric Withstanding Voltage. When switches are tested as speci-

fied in 4.7.3, they shall withstand the application of the specified voltages

without acring, breakdown of insulation, or visible damage to the switch

parts. There shall be no flashover or leakage in excess of 1 milliampere.

3.6.3 Operation at Altitude. When tested as specified in 4.7.7.3, the

switches shall withstand the application of the specified voltages without

arcing, breakdown of insulation, or visible damage to the switch parts.

There shall be no flashover or leakage in excess of 1 milliampere,

3.6.4 High Temperature. When the assembly is tested as specified in

4.7.7.4, there shall be no plastic deformation, separation, or breakage of

the molded parts comprising the basic grip body (see 3.3.2). At the maximum

temperature specified in 4.7.7.4 all switches shall operate in conformance

with their respective design requirements.

3.6.5 Low Temperature. When the assembly is tested as specified in 4.7.7.5,

there shall be no separation, spalling or cracking of the molded parts com-

prising the basic grip body (see 3.3.2) nor displacement of any of the

switches in their mounts. At the minimum temperature specified in 4.7.7.5$

all switches shall operate in conformance with their respective design re-

quirements.

3.6.6 Strength of Assembly. When the assembly is tested as specified in

4.7.6, there shall be no breakage. There shall be no loosening of com-

ponents or damage to the basic assembly nor to any of the installed parts

which results in failure to function in accordance with 4.7.2 and 4.7.3.

3.6.7 Vibration. When the assembly is tested as specified in 4.7.7.1,

there shall be no separation of closed switch contacts or closure of open

contacts having a duration exceeding 10 microseconds. There shall be no

evidence of damage to any part of the assembly which results in failure

to function in accordance with 4.7.2, 4.7.3 and 4.7.4.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business