 |
|||
|
Page Title:
Table I. First article inspection |
|
||
| ||||||||||
|
|  MIL-G-81737A(AS)
4.4.1.3 Failure and retest. Failure to meet any of the requirements
specified herein or pass any of the first article examinations or tests
specified in Table I shall be cause for rejection. Full particulars
concerning the failure and measures to be taken to correct the defects shall
be forwarded to the government inspector, contracting officer, and responsible
design activity with 30 days of the failure (see 6.2). Upon resubmission of
the unit for inspection after a failure, the inspection shall start at the
beginning of the test during which the failure occurred.
TABLE I.
First article inspection
REQUIREMENT
METHOD
SEQUENCE
EXAMINATION OR TEST
PARAGRAPHS
PARAGRAPH
1
Workmanship/Examination of
3.7
4.6.1
product
2
Wiring and rotation
3.5.1
4.6.2
Leakage
3
3.5.5
4.6.5
4
Gel mobility (standard conditions)
3.5.2
4.6.3
5
Low temperature (mobility with
3.5.2
4.6.8
solutions and fuel at +20 5F)
3.6a(1)
3.6b(l)
High temperature (mobility with
6
3.5.2
4.6.9
solutions and fuel at +120 5F
3.6a(2)
3.6b(2)
Vibration
7
3.6b(3)
4.6.10
Gel mobility (standard conditions)
8
3.5,2
4.6.3
Blending and capacity (standard
3.5.3
4.6.4
9
conditions)
3.5.4
10
Pressure switch
3.5.6
4.6.6
11
Temperature switch
3.5.7
4.6.7
Examination of product
12
4.6.1
4.5 Quality conformance inspection. Quality conformance inspections shall
be as specified in Table II in the sequence shown. Failure to pass any of the
examinations or tests specified in Table II shall be cause for rejection.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals