 |
|||
|
Page Title:
Plastic and metal characteristics |
|
||
| ||||||||||
|
|  MIL-H-48215(MU)
DRAWINGS
PICATINNY ARSENAL
8808362 - Packing and Marking for Storage
and Shipments
8866673 - Hook
8866674 - Hook (Modified)
8883536 - Bag, Packing for Repair Parts
EL-8866674 - Equipment List
(Copies of specifications, standards, drawings, and publica-
tions required by suppliers in connection with specific
procurement functions should be obtained from the procuring
activity or as directed by the contracting officer.)
3.
REQUIREMENTS
3.1 Materials. The contractor shall furnish objective
evidence (see 6.2) that the material complies with the speci-
fications listed on the applicable drawing.
3.2 Assembly. The hook shall comply with all require-
ments specified on the drawing (dwg) 8866674, with all re-
quirements specified herein, and with the requirements of all
applicable specifications to the extent specified on the
drawing and herein.
3.3 Workmanship.
3.3.1 Plastic and metal characteristics. All compo-
nents shall be free from cracks, splits, cold flow, shrinkage,
cold shuts, inclusions, porosity, or any similar characteristic.
3.3.2 Threads. Threads shall be full and undamaged
for the entire minimum length or depth as required on the
applicable drawing.
3.3.3 Burrs. Parts shall be free from burrs.
3.3.4 Foreign matter. Parts shall be free from chips,
dirt, grease, rust, corrosion, or any embedded foreign ma-
terial.
3.3.5 Cleaning. The cleaning method shall not be in-
jurious to any of the parts, nor shall the parts be con-
taminated by the cleaning agent.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the supplier
is responsible for the performance of all inspection re-
quirements as specified herein. Except as otherwise
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals