 |
|||
|
|
|||
| ||||||||||
|
|  MIL-H-48408A(MU)
4.3.2.1 Components and subassemblies.- All compoents and subassem-
blies shall be inspected in accordance with the inspection provisions con-
tained in Supplementary Quality Assurance Provisions (SQAP's) listed in
the Technical Data Package (TDP). In the absence of SQAP's, the appli-
-
cable Quality Assurance Provisions of MIL-F-13926 shall apply. Examina
tion and tests related to Section 3 herein shall be performed on a single
defect (individual characteristic) basis in accordance with MIL-STD-105
and the sampling plans specified in Tables I, II and III herein. Exam-
ination and-tests-for packaging, packing, and marking shall be in accord-
ance with MIL-P-14232 and Section 5 herein. The tabulated classification
of defects in Tables I, II and III shall constitute the minimum inspection
to be performed by the supplier after first article approval and prior to
Government acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
(1OO% INSPECTION)
NOTE: The tests in Table I shall be conducted at a temperature between
+70F and +80F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units
and resubmittance of rejected lots shall be in accordance with "Acceptance
and Rejection" as specified in MIL-STD-105.
4.3.4 Certification.- Certification shall include test data and re-
sults for the characteristics specified below. Certification shall be
provided prior to performing final acceptance inspection, and remain in
effect throughout the contract production, including recording data and
results therefrom. Recorded data and results shall be made available to
the Government upon request. A new certification will be required should
any changes occur in materials manufacturing processes and techniques
previously certified.
4.4 Special sampling.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals