 |
|||
|
Page Title:
Quality assurance terms and definitions |
|
||
| ||||||||||
|
|  MIL-H-63192 (AR)
or purchase order, the supplier may use his own or any other
facilities suitable for performance of the inspection require-
ments specified herein, unless disapproved by the Government.
The Government reserves the right to perform any of the inspec-
tions set -forth in the specification where such inspections
are deemed necessary to assure supplies and services conform
to prescribed requirements.
4.1.1 The contractor shall perform, as a minimum, inspec-
tions in accordance with the specifications, quality assurance
provisions, MIL-P-45971 and the contract. These minimum
inspections shall not be construed as relieving the contractor
of his responsibilities under terms of the contract to furnish
the Government with items complying with and conforming to the
requirements of the contract, drawings and specifications.
4.2 Quality assurance terms and definitions.-Quality
assurance terms and definitions used herein are in accordance
with M1L-STD-109,
4.3 Classification of inspection.-The inspection require-
ments specified herein are classified as follows:
a.
First article inspection (see 4.4)
b.
Quality conformance inspection (see 4.5)
4.4 First article inspection.-The first article shall be
submitted for inspection in accordance with the contract.
The
first article sample shall be representative of the production
process to be used during quantity production.
The first article
shall be subjected to the quality conformance inspection
specified herein and such other inspections as necessary to
determine that all requirements of the contract have been met.
4.5
Quality
conformance
inspection.
4.5.1 Inspection lot.-Unless otherwise specified herein,
the formation, size and presentation of inspection lots of
howitzers and parts shall be in accordance with MIL-STD-105.
Howitzers shall be assembled from lots of component parts that
meet all the inspection requirements specified herein.
4.5.2
Examination.
4.5.2.1 Parts and assemblies.-Parts and assemblies shall
be examined to determine compliance with the requirements of
3.2.1 through 3.2.7.1, 3.5, 3.8 and MIL-P-45971.
Parts and
assemblies failing to comply shall be rejected.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals